English
Views: 0 Author: Site Editor Publish Time: 2023-08-23 Origin: Site
Gas flow meter is a widely used equipment for measuring gas flow rate, but during use, some common faults may be encountered, such as inaccurate readings, large measurement errors, and flow meter jamming. This article will introduce how to adjust and eliminate common faults encountered in gas flow meters, helping you better use and maintain gas flow meters.
Gas flow meters may sometimes have inaccurate readings during use. This may be caused by sensor contamination, pipeline vibration, and other reasons. To address this issue, the following measures can be taken:
Regularly clean the sensor to keep its surface clean and prevent the accumulation of dirt and impurities;
Increase the fixation between sensors and pipelines to reduce the impact of vibration on readings;
Regularly calibrate to ensure the accuracy of the flow meter.
The measurement error of gas flow meters may be caused by various reasons, such as uneven distribution of gas flow velocity in pipelines, sensor aging, etc. To reduce errors, the following measures can be taken:
Adjust the distribution of gas flow velocity inside the pipeline to ensure uniform flow velocity and reduce the impact on measurement results;
Regularly inspect the sensors for aging and replace them in a timely manner;
Use high-quality sensors and equipment to improve measurement accuracy.
During the use of gas flow meters, there may be situations where the flow meter is stuck, resulting in the inability to measure normally. This may be caused by impurities inside the pipeline, moisture in the gas, and other reasons. To address this issue, the following measures can be taken:
Regularly clean the pipeline to remove impurities inside the pipeline;
Add a filter at the gas inlet to filter out moisture and impurities in the gas;
Add lubricant to the bearings and gears of the flow meter to reduce the possibility of jamming.
