English
| Quantity: | |
|---|---|
KLWGY series turbine flow sensor (hereinafter referred to as sensor) is a speed-type flow meter based on the principle of torque balance. It is widely used in petroleum, chemical industry, metallurgy, water supply, paper making and other industries. It is an ideal meter for flow measurement and energy saving.
The sensor and the display instrument are used together, suitable for measuring the liquid in the closed pipe with stainless steel 1Cr18Ni9Ti, 2Cr13 and corundum Al2O3, which has no corrosive effect and no fiber, particle and other impurities.If it is matched with the display instrument with special function, it can also be used for quantitative control and over-alarm.The explosion-proof type of this product (Exia IICT4) can be used in the environment with explosion danger.
The sensor is suitable for medium with a viscosity less than 5x10-6m2/s at the operating temperature. For liquids with a viscosity greater than 5x10-6m2/s, the sensor should be used after the actual liquid calibration.
If the user needs a special type of sensor, the order can be negotiated. If the explosion-proof sensor is needed, it shall be explained in the order.
● High-quality turbine, beyond the normal range
● Support a variety of transmitters, suitable for different application requirements
● Intelligent processing, three-point nonlinear correction of unique instrument coefficient
Nominal diameter（mm） | Flow range （m3/h） | Accuracy | Explanation |
DN4 | 0.04-0.25m3/h | 1.0 Level | KLWGY: pulse type, 24VDC power supply; KLWYB: battery-powered on-site display type; KLWYC: On-site display/4~20mA two-wire current output; KLWYD: RS485 communication output; |
DN6 | 0.1-0.6m3/h | ||
DN10 | 0.2-1.2m3/h | ||
DN12 | 0.2-2m3/h | 0.5 Level | |
DN15 | 0.6-6m3/h | ||
DN20 | 0.7-7m3/h | ||
DN25 | 1-10m3/h | ||
DN32 | 1.5-15m3/h | ||
DN40 | 2-20m3/h | ||
DN50 | 4-40m3/h | ||
DN65 | 7-70m3/h | ||
DN80 | 10-100m3/h | ||
DN100 | 20-200m3/h | ||
DN125 | 25-250m3/h | 1.0 Level | |
DN150 | 30-300m3/h | ||
DN200 | 80-800m3/h |
KLWGY series turbine flow sensor (hereinafter referred to as sensor) is a speed-type flow meter based on the principle of torque balance. It is widely used in petroleum, chemical industry, metallurgy, water supply, paper making and other industries. It is an ideal meter for flow measurement and energy saving.
The sensor and the display instrument are used together, suitable for measuring the liquid in the closed pipe with stainless steel 1Cr18Ni9Ti, 2Cr13 and corundum Al2O3, which has no corrosive effect and no fiber, particle and other impurities.If it is matched with the display instrument with special function, it can also be used for quantitative control and over-alarm.The explosion-proof type of this product (Exia IICT4) can be used in the environment with explosion danger.
The sensor is suitable for medium with a viscosity less than 5x10-6m2/s at the operating temperature. For liquids with a viscosity greater than 5x10-6m2/s, the sensor should be used after the actual liquid calibration.
If the user needs a special type of sensor, the order can be negotiated. If the explosion-proof sensor is needed, it shall be explained in the order.
● High-quality turbine, beyond the normal range
● Support a variety of transmitters, suitable for different application requirements
● Intelligent processing, three-point nonlinear correction of unique instrument coefficient
Nominal diameter（mm） | Flow range （m3/h） | Accuracy | Explanation |
DN4 | 0.04-0.25m3/h | 1.0 Level | KLWGY: pulse type, 24VDC power supply; KLWYB: battery-powered on-site display type; KLWYC: On-site display/4~20mA two-wire current output; KLWYD: RS485 communication output; |
DN6 | 0.1-0.6m3/h | ||
DN10 | 0.2-1.2m3/h | ||
DN12 | 0.2-2m3/h | 0.5 Level | |
DN15 | 0.6-6m3/h | ||
DN20 | 0.7-7m3/h | ||
DN25 | 1-10m3/h | ||
DN32 | 1.5-15m3/h | ||
DN40 | 2-20m3/h | ||
DN50 | 4-40m3/h | ||
DN65 | 7-70m3/h | ||
DN80 | 10-100m3/h | ||
DN100 | 20-200m3/h | ||
DN125 | 25-250m3/h | 1.0 Level | |
DN150 | 30-300m3/h | ||
DN200 | 80-800m3/h |
