What Are The Installation Requirements That Need To Be Paid Attention To When Using Metal Rotor Flow Meters in The Early Stage?

Metal rotor flowmeter is a commonly used flowmeter, which has the advantages of high accuracy, good stability, and strong reliability. When using metal rotor flow meters in the early stage, the following installation requirements need to be noted:

Determine installation location: Choose an appropriate location to ensure that the installation of the flow meter is convenient, safe, reliable, and easy to maintain. At the same time, it is necessary to consider the measurement range and medium characteristics of the flow meter in order to select a suitable flow meter.

Pipeline requirements: Before installing the flow meter, it is necessary to ensure that there are no impurities, particles, or other impurities in the pipeline to avoid wear or blockage of the flow meter. At the same time, it is necessary to ensure that the inner wall of the pipeline is smooth and even, so that the flow meter can rotate smoothly.

Connection requirements: When connecting the flow meter, it is necessary to ensure that the connection is tight and sealed to prevent medium leakage or pressure loss. At the same time, it is necessary to ensure that the length of the pipeline at the connection is appropriate to avoid affecting the measurement of the flow meter.

Debugging requirements: After installation is completed, the flow meter needs to be debugged to ensure its normal operation. The debugging content includes checking whether the wiring of the flow meter is correct, checking whether the zero point of the flow meter is accurate, etc.

Safety requirements: When installing and using a flow meter, safety considerations need to be taken into account. For example, for explosive and flammable media, corresponding safety measures need to be taken to ensure the safety of personnel and equipment.

In summary, the installation requirements for metal rotor flow meters are quite strict, and they need to be installed and debugged according to the requirements to ensure their normal operation and improve measurement accuracy and stability.