English
| Quantity: | |
|---|---|
The magnetostrictive level measuring technology appears, which solves the high precision and high reliability ground survey well ，The problem of liquid level and interface. The magnetostrictive level meter can measure the liquid level and the interface at the same time.
Precision measuring instrument. Meters to use advanced microprocessors and company - exclusive edition of the embedded system.
With temperature up to 450℃ and pressure up to 22MPa optional grades. Probe forms are varied, not Characteristics affected by dielectric constant, temperature, pressure and other factors of liquid. Can adapt to a variety of conditions and response .Use a plan. The product can output two-wire current signal and integrate HART communication technology. instrumentation With modular design, so that the product in testing, maintenance programs are diverse and simple.
| Operating temperature | Electronic warehouse :-40~+85℃; Measuring rod :-40~+150℃ |
| range | Hard rod 50~5000mm; Can be rolled soft rod 50~2500mm |
| Output form | 4~20mA; 4~20mA+HART protocol |
| Linear error | Better than ±0.05%FS |
| repeatability | Better than 0.02%FS |
| Power consumption | Analog model 50mA; Pulse output less than 2mA; RS485 port 50mA |
| accuracy | + / - 0.3 mm |
| resolution | Better than ±0.02%FS,0.1mm |
| lag | Better than ±0.02%FS |
| Temperature coefficient | 50PPm/C |
| Output ripple | Less than 20mV |
| Response time | 0.2~6ms(according to rod length) |
| Dead zone | Normal type: upper dead zone, 40mm; Lower dead zone, 40mm(appropriate change according to user requirements) |
| Rod material | 1Cr18Ni9Ti, 304ss 316ss or user special customization |
| Shell material | 304ss or user special customization |
| Procedure interface | 3/4 "NPT |
| Power supply | DC24V |
| communication | RS-485,RS-232,Modbus,Hart and other protocols |
The magnetostrictive level measuring technology appears, which solves the high precision and high reliability ground survey well ，The problem of liquid level and interface. The magnetostrictive level meter can measure the liquid level and the interface at the same time.
Precision measuring instrument. Meters to use advanced microprocessors and company - exclusive edition of the embedded system.
With temperature up to 450℃ and pressure up to 22MPa optional grades. Probe forms are varied, not Characteristics affected by dielectric constant, temperature, pressure and other factors of liquid. Can adapt to a variety of conditions and response .Use a plan. The product can output two-wire current signal and integrate HART communication technology. instrumentation With modular design, so that the product in testing, maintenance programs are diverse and simple.
| Operating temperature | Electronic warehouse :-40~+85℃; Measuring rod :-40~+150℃ |
| range | Hard rod 50~5000mm; Can be rolled soft rod 50~2500mm |
| Output form | 4~20mA; 4~20mA+HART protocol |
| Linear error | Better than ±0.05%FS |
| repeatability | Better than 0.02%FS |
| Power consumption | Analog model 50mA; Pulse output less than 2mA; RS485 port 50mA |
| accuracy | + / - 0.3 mm |
| resolution | Better than ±0.02%FS,0.1mm |
| lag | Better than ±0.02%FS |
| Temperature coefficient | 50PPm/C |
| Output ripple | Less than 20mV |
| Response time | 0.2~6ms(according to rod length) |
| Dead zone | Normal type: upper dead zone, 40mm; Lower dead zone, 40mm(appropriate change according to user requirements) |
| Rod material | 1Cr18Ni9Ti, 304ss 316ss or user special customization |
| Shell material | 304ss or user special customization |
| Procedure interface | 3/4 "NPT |
| Power supply | DC24V |
| communication | RS-485,RS-232,Modbus,Hart and other protocols |
